Table of Contents
Advertisement
Introduction
Main Features
• Features four pairs of stereo (eight-channels) digital audio input plus one
pair of stereo (two-channels) analog audio input.
• Connects to computers via USB for input and output of digital audio signals.
• Each digital audio signal input is equipped with a sample rate converter,
thus allowing you to mix even inputs with different sampling frequencies
and phases.
Accessories
The following additional items are shipped with the M-1000. Please take a moment
to confirm that all of the following items have been included in the box.
• Owner's Manual (this volume)
• "Functions and Operations of Each Section" chart
• CD-ROM (Driver)
• USB cable
• Rubber feet (4)
• Power cable
Basic Operation
Preparation
Attaching the rubber feet
If necessary, attach the rubber feet on the
bottom panel as shown in the figure.
Setup
Mount the M-1000 in rack mount, set it on a table or desk, or in another suitable
location.
* If the M-1000 is placed directly above a power amp, the heat generated by the amp may
adversely affect the M-1000.
Connecting the Power Source
Use the included power cable to
connect the unit with a power source.
The pin assignment for the XLR type connectors
* The pin assignment for the XLR type connectors is as shown below.
Before making any connections, make sure that this pin assignment
is compatible with that of all your other devices.
M-1000
rear panel
power cable
7
Advertisement
Table of Contents
