System - Page; Firmware - Page; E-Mail Settings - Page - Verbatim POWERBAY NAS Array User Manual

System - Page

The System menu provides options for system restarts, saving and
loading confi guration settings, and setting idle times.
Restart: Click 'Restart' to reboot the PowerBay NAS array.
Defaults: Click 'Restore' to reset the PowerBay NAS array to factory
default settings. Use the restore feature only if necessary as this will
erase all previously saved settings on the unit. This process will not
harm or change any data on the internal drives.
Shutdown: Press the Shutdown button to initiate the power down
sequence, which returns the unit to the standby power state.
Confi guration Settings: Save confi guration settings by pressing
the 'Save' button and then choosing a destination folder for the
confi guration fi le. The default name of the confi guration fi le is
CfgBackup.
To load previously saved confi guration settings 'Browse' to the
confi guration fi le, and then press the 'Load' button.
Idle Time: Enter a value for the System Inactivity Timer. If the
administrator is idle for longer than the specifi ed time, he will be
logged out of the confi guration area. Click 'Apply' when fi nished.
System Overheat Temperature: Enter a value for the thermal monitor
trip point. If the system temperature is exceeded for more than 1
minute, the system will be shutdown automatically. Click 'Apply' when
fi nished.
Automatic Power Recovery: If this feature has been enabled, and the
electric power is cut off or the system cannot complete a normal power
off, the system will power on automatically when power is restored.
Click 'Apply' when fi nished.
Schedule Power On/Off: You can set what time you want to shutdown
the PowerBay NAS array or to power on the PowerBay NAS array. Use
'Mode' to disable it or en¬able it.
When 'Schedule Power On/Off Mode' is set to 'Days of Week', you
can fi ll in the table presented to defi ne on/off times for each day
independently.
Click 'Apply' when fi nished.

Firmware - Page

The PowerBay NAS array Firmware menu allows you to install new
fi rmware releases for the device.
Firmware: You can upgrade the fi rmware of the device from this page.
The fi rmware fi le you want to use must be saved on the local hard drive
of the computer you are working from. Click on 'Browse' to search the
local hard drive for the fi rmware fi le to be used for the update. Click
'Upgrade' to begin the upgrade. Please wait a few minutes for the fi le
to download fully and for the unit to return to the standby power state.
You will then be prompted to pull out the power plug, to reinsert the
power plug, and then to power on the unit to complete the upgrade
process.

E-Mail Settings - Page

On the E-Mail settings page you can confi gure the PowerBay NAS
array to automatically prepare and send e-mails to alert you to certain
operational conditions and drive status conditions.
Login Method: Select 'Account' if your SMTP server requires
authentication. Select 'anonymous' if it does not.
19