Nfs Server - Page; Rsync Server - Page - Verbatim POWERBAY NAS Array User Manual

FTP Server: This option allows the user to enable and disable the use
of FTP Server on the device.
Max User: Sets the maximum number of users that can connect to the
FTP Server at once.
Idle Time: Sets the amount of time a user can remain idle before being
disconnected.
Port: Sets the FTP port number. The default is port 21.
In order to use FXP (File Exchange Protocol) for server-to-server data
transfer, please make sure to change the port from 21 to some other
port as listed in the Port section of the web UI. Also, please make sure
to open the corresponding port on your router and forward that port
from your router to the PowerBay NAS array.
Flow Control: Allows you to limit the amount of bandwidth available
for each user.
Client Language: Most standard FTP clients like Windows FTP, only
support Western European codepage when transferring fi les. Support
has been added for non standard FTP clients that are capable of
supporting these character sets.

NFS Server - Page

This section allows you to enable the built-in NFS server to share your
folders by NFS.
NFS Server Allowed: Enable or disable the NFS Server.
Host: Enter an IP address of NFS clients, the fully qualifi ed domain
name, netgroups or IP networks. This fi eld also supports wildcards.
Folder: The folder you want to export to NFS clients.
Root Squash NFS Client: Map requests from User ID/Group ID 0 to the
anony¬mous User ID/Group ID.
List: This section lists information about the confi gured NFS clients.
It includes Allowed Hosts, Paths, Root Squash, and Read/Write
permissions.

Rsync Server - Page

This section allows you to set up your Rsync Server.
Rsync Server: Enable or disable the Rsync Server.
User Name: Enter the User Name allowed to connect to this Rsync
Server.
Password: Enter the Password used for the user to connect to the
Rsync Server.
Folder: Select the directory available to the Rsync Server.
Sub-Folder: Enter the name of sub directory. It will be created under
"Folder".
Shared Name: Enter the shared name for the Folder.
Rsync Shared Folder List: This section lists the existing shared folders
in the Rsync folder.
AFP - Page
Apple Filing Protocol (AFP) provides fi le services for Mac OS X and
original Mac OS. This implementation is compatible with AFP 3.1,
which was introduced in Mac OS X Server version 10.2.
AFP: Select Enable or Disable to turn AFP on or off. It is disabled by
default.
Once Enabled is checked, related protocol parameters must be
selected.
Mac Codepages: Select a codepage which is used by your Mac OS
9. If your environment only has Mac OS X, you can ignore this setting.
11