General Safety Precautions - Husqvarna PG 400SF Operator's Manual

General safety precautions

WARNING! This section describes basic
!
safety directions for using the machine. This
information is never a substitute for
professional skills and experience. If you get
into a situation where you feel unsafe, stop
and seek expert advice. Contact your dealer,
service agent or an experienced power
cutter user. Do not attempt any task that you
feel unsure of!
• Do not use the machine without first reading and
understanding the contents of this Operator's Manual.
Work area safety
• Do not use the machine in bad weather, such as dense
fog, rain, strong wind, intense cold, etc.
• Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
• The machine should not be used in areas where potential
for fire or explosions exist.
Electrical safety
WARNING! There is always a risk of shocks
!
from electrically powered machines. Avoid
unfavourable weather conditions and body
contact with lightning conductors and metal
objects. Always follow the instructions in the
Operator's manual to avoid damage.
• Never drag the machine by means of the cord and never
pull out the plug by pulling the cord.
• Keep all cables away of water, oil and sharp edges. Make
sure the cable is not pinched in doors, fences or the like.
Otherwise it can cause the object to become live.
• Check that the cables are intact and in good condition.
Use cable intended for outdoor use.
• Never use the machine if any cable is damaged, but hand
it in to an authorized service workshop for repair.
• The machine should be connected to an earthed outlet
socket.
• Check that the mains voltage corresponds with that stated
on the rating plate on the machine.
• Be on your guard for electrical shocks. Avoid having body
contact with lightning-conductors/metal in the ground.
• Do not use an extension cord while it is rolled up to avoid
overheating.
• Ensure the cord is behind you when you start to use the
machine so that the cord will not be damaged.
6 –
English
SAFETY INSTRUCTIONS
Personal safety
WARNING! Overexposure to vibration can
!
lead to circulatory damage or nerve damage
in people who have impaired circulation.
Contact your doctor if you experience
symptoms of overexposure to vibration.
Such symptoms include numbness, loss of
feeling, tingling, pricking, pain, loss of
strength, changes in skin colour or
condition. These symptoms normally appear
in the fingers, hands or wrists. These
symptoms may be increased in cold
temperatures.
• Wear personal protective equipment. See instructions
under the heading Personal protective equipment.
• Never use the machine if you are tired, if you have drunk
alcohol, or if you are taking medication that could affect
your vision, your judgement or your co-ordination.
• Never allow anyone else to use the machine without first
ensuring that they have understood the contents of the
operator's manual.
• All operators shall be trained in the use of the machine.
The owner is responsible for ensuring that the operators
receive training.
• People and animals can distract you causing you to lose
control of the machine. For this reason, always remain
concentrated and focused on the task.
• Be careful as clothing, long hair, and jewellery can get
caught in moving parts.
• Never leave the machine unsupervised with the engine
running.
• Make sure that there is always another person close at
hand when you use the machines, so that you can call for
help if an accident should occur.
• Always ensure you have a safe and stable working
position.