Assembly - Ryobi EBG2515 Owner's Operation Manual

ADJUSTABLE
KNOB
SAFETY
EYE SHIELD
WORK REST
(LEFT)
MOUNTING SAFETY EYE SHIELDS
See Figure. 4~5.
Mount the left and right eye shield mounting arm to the inside
of the wheel guards using the clamp brackets, hex bolts
(M6 x 30 mm), and washers (6mm).
Use the illustration as a guide to determine which eye shield
mounting arm is mounted on the left and which eye shield
mounting arm is mounted on the right of the grinder.
Once eye shield mounting arms are firmly in place, slide the
shield bracket onto the eye shield mounting arm. Tighten
the adjustable knob leaving it loose enough to allow the
safety eye shield to be raised and lowered easily.
WARNING:
To prevent personal injury, never operate the bench
grinder unless the safety eye shields and spark deflectors
are properly installed and in place.
FEATURES - EBG2515 / EBG3720
SPARK
DEFLECTOR
(LEFT)
ADJUSTMENT
KNOB
COOLANT
TRAY
MODEL EBG2515/ EBG3720
AUTO-ON
WORKLIGHT
0 1

ASSEMBLY

SAFETY
EYE SHIELD
SAFETY
EYE SHIELD
Page 7
SPARK
DEFLECTOR
(RIGHT)
SAFETY EYE SHIELD
WITH MAGNIFYING GLASS
WHEEL
GUARD
WORK REST
(RIGHT)
OFF
EYE SHIELD
MOUNTING ARM
WASHER
ADJUSTABLE
KNOB
SHIELD ROD
ADJUSTABLE KNOB
WASHER
HEX BOLT
0 1
ON
POWER
SWITCH
Fig.3
HEX BOLT
Fig.4
Fig. 5