Advertisement
The Traxxas TQ-3 Radio System
TQ-3 Radio System Rules
Remember, always
turn the TQ-3
transmitter on first
and off last to avoid
damage to your S-Maxx.
18
Each time you prepare to run your
S-Maxx, you must clear your frequency
to be sure no one else in the area is
using the same channel as you.
There are six possible channels,
numbered 1 through 6. Each is
represented by a color. Look at the
crystal plugged into the back of your
transmitter to determine which channel
your truck is assigned to.
Always turn your TQ-3 transmitter on first and off last. This
procedure will help to prevent your S-Maxx from receiving
stray signals from another transmitter, or other source, and
running out of control.
Always have the transmitter and receiver turned on before
you start the engine. Never turn the radio system off while
the engine is running. The on/off switch in the model only
turns the receiver on and off. It does not turn off the engine.
1
Always use new or freshly charged batteries for the radio
Channel 1
system. Weak batteries will limit the range of the radio signal
Brown
between the receiver and the transmitter. Loss of the radio
Channel 2
signal can cause you to lose control of your S-Maxx.
Red
Channel 3
Orange
Channel 4
Yellow
Channel 5
Green
Channel 6
Blue
2
3
Advertisement
