Thrustmaster FERRARI MOTORS User Manual page 4

PC
INSTALLATION ON PC
The CD-ROM included with this product allows you to install the Force Feedback drivers.
1. Insert the installation CD-ROM into your CD-ROM drive. Follow the on-screen instructions to install the
Force Feedback drivers. Once installation is complete, click Finish and restart your computer.
2. Once your computer has restarted, connect the USB connector to one of your computer's USB ports.
Windows® will automatically detect the new device.
3. The drivers are installed automatically. Follow the on-screen instructions to complete the installation.
4. Select Start/Settings/Control Panel and then double-click Game Controllers (or Gaming Options,
depending on your operating system).
The Game Controllers dialog box displays the gamepad's name with OK status.
5. In the Control Panel, click Properties to configure your gamepad:
Test device: allows you to test and view the buttons, D-pad and axes for the 2 mini-sticks, for the
optical wheel and for the 2 triggers.
Test forces: allows you to test 8 vibration effects and configure vibration effect settings.
You are now ready to play!
SELECTING THE NUMBER OF AXES ON PC
Selection of axes via "Software": On page 1 of the Control Panel, click the number of axes you wish to
use and then click OK.
Selection of axes via "Hardware":
Press the MODE button (6) to select the number of active axes.
3/10