Starting Voice Album - Olympus W-20 Instructions Manual

Starting Voice Album

1
2
30
1
Insert end A of the USB cable to
your PC's USB port or USB hub.
2
Confirm that the recorder is not in
use before attaching end b of the
USB cable to the PC terminal port
of the recorder.
• Release the HOLD switch on the recorder
and make sure that the recorder is in stop
mode before plugging in the USB cable.
When the recorder and the PC are
connected with the USB cable, the
recorder display alternately flashes "PC"
and "LINK".
To use Voice Album without connecting the recorder to the
PC, or if Voice Album does not start automatically when you
connect the recorder to the PC, click on the [Start] button,
point to [All Programs], select [OLYMPUS Voice Album] then
click on [OLYMPUS Voice Album].
To exit Voice Album, click on the
click on [File], and then click on [Exit Voice Album].
......................................................................................................
Notes
• When the recorder is connected to a PC, the power will be supplied
from the USB cable.
• When you start Voice Album for the first time by connecting the
recorder to the PC after installation, it may take a few minutes to
start.
• When the recorder is connected to the PC, the recorder
accommodates only Voice Album operations.
• Do NOT use any USB cable other than the one supplied.
• Do NOT disconnect the USB cable before file transfer or recording
is completed.
button on the window, or