Direct Tuning - Sony ST-RV444ES Operating Instructions Manual

Fm stereo fm-am receiver
Hide thumbs Also See for ST-RV444ES:
Table of Contents

Advertisement

PRESET TUNING +/–
DISPLAY
FM/AM
1 / u
A
OFF
B
A+B
+
FM MODE
MEMORY
Brief descriptions of buttons used to
receive broadcasts
PRESET TUNING +/– buttons: Press to scan all preset
radio stations.
DISPLAY button: Press to display the RDS information.
MEMORY button: Uses for memorizing preset stations.
TUNING +/– buttons: Press to scan all available radio
stations.
FUNCTION control: Rotate to select the tuner.
FM MODE button: If "STEREO" flashes in the display
and the FM stereo reception is poor, press this button to
improve the sound. You will not be able to enjoy stereo
effect but the sound will be less distorted.
Note
If "STEREO" does not appear at all even when the FM broadcast
is received normally, press this button to turn on the "STEREO"
indication.
FM/AM button: Press to select the FM or AM band.
46
TUNING +/–
+
+
FUNCTION

Direct Tuning

Use the supplied remote to perform the following
operations. For details on the buttons used in this section,
see the operating instructions for the supplied remote.
1
Rotate FUNCTION to select the tuner.
The last received station is tuned in.
2
Press FM/AM to select the FM or AM band.
3
Press D. TUNING.
4
Press the numeric buttons to enter the frequency.
Example 1: FM 102.50 MHz
1
b
0
Example 2: AM 1350 kHz
(You don't have to enter the last "0" when the tuning scale is
set to 10 kHz.)
1
b
3
If you cannot tune in a station and the
entered numbers flash
Make sure you've entered the right frequency. If not,
repeat Steps 3 and 4.
If the entered numbers still flash, the frequency is not
used in your area.
5
If you've tuned in an AM station, adjust the
direction of the AM loop antenna for optimum
reception.
6
Repeat Steps 2 to 5 to receive another station.
z
If you try to enter a frequency that is too precise for the
tuning scale
The entered value is automatically rounded up or down.
The tuning scale for direct tuning:
FM: 50 kHz
AM: 10 kHz (Can be changed to 9 kHz. To change the AM tuning
scale, see page 59.)
b
2
b
5
b
0
b
5
b
0

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Str-v333es

Table of Contents