How To Light A Burner - Zanussi ZGG 742 E Instruction Booklet

How to light a burner

1. Touch the main ON/OFF Control
about 3 seconds to switch on the hob.
The red indicator above the touch control
lights up, an acoustic signal sounds and
the hob is ready to use.
2. Touch the Burner Ignition Touch Control
of the required burner. The flame
level indicators located right above the
symbols and
3. Within about 3 seconds, touch the
Increasing
Control to light the burner.
- If touch control
burner automatically lights at maximum
flame level (all the flame level indicators
illuminate).
8
illuminate.
or Decreasing
is selected, the
for
Touch