Table of Contents
Advertisement
Electrical connections
Any electrical work required to install
this hob should be carried out by a
qualified electrician or competent
person, in accordance with the
current regulations.
THIS HOB MUST BE EARTHED.
The manufacturer declines any liability
should these safety measures not be
observed.
This hob is designed to be connected to
a 230 V 50 Hz AC electrical supply.
Before switching on, make sure the
electricity supply voltage is the same as that
indicated on the hob rating plate. The rating
plate is located on the bottom of the hob. A
copy is attached on the back cover of this
book.
The hob is supplied with a 3 core flexible
supply cable incorporating a 3amp plug fitted.
In the event of having to change the fuse, a
3amp ASTA approved (BS 1362) fuse must
be used.
Should the plug need to be replaced for any
reason, the wires in the mains lead are
coloured in accordance with the following
code:
Green and Yellow - Earth
Blue
Brown
— Connect the green and yellow (earth)
wire to the terminal in the plug which
is marked with the letter 'E' or the
earth symbol
and yellow.
- Neutral
- Live
or coloured green
29
Advertisement
Table of Contents
