Starter Switch - Yamaha GLADIATOR Ower's Manual

1
3
2
4
5
1. PassSwitch " "
2. Dimmer Switch
3. Light switch
4. Turn signal cum cancellation switch"
5. Horn switch
Handlebar switches
Pass switch " "
Press the switch to operate the
Passing Light.
Dimmer switch
Turn the switch to" " for the high
beam and to " " for the low beam.
INSTRUMENT AND CONTROL FUNCTIONS
Turn signal switch
To signal a right-hand turn, push the
switch to " ". To signal a
hand turn, push the switch to "
Once the switch is released it will
return to the center position. To
cancel the signal, push the switch in
after it has returned to the center
position.
Horn switch " "
" Press the switch to sound the horn.
Lights switch
Turning the light switch to "
turns on the meter light and tail-light.
Turning the light switch to "
turns the headlight on also.
3-3
2
OFF
left-
".
ON
1
Press
1.

Starter Switch

2. Kill Switch
Starter Switch
Press the button to start the bike.
Vehicle should be in
1) Neutral Position
2) If in Gear clutch lever to be
",
pressed
",
Kill Switch
Kill switch is an emergency switch to
cut "OFF" engine & should always
be in "ON" positon at the time of
starting the vehicle.