Table of Contents
Advertisement
Changing the setup menu (continued)
HT-CN410DVH
ENGLISH
Change the system with conventional TV connecting
If you use a conventional TV, you must select the INTERLACE (i) mode from remote control direct button "I/P SCAN".
INTERLACE mode is use for normal video output.
For conventional TV connection, please refer to page 12.
Change the system to a TV with Progressive-Scan
If you use TV with Progressive-Scan capability and connect it to the COMPONENT VIDEO OUT sockets of the DVD main unit (see page 14), you must select the PROGRES-
SIVE-SCAN (P-SCAN) mode from remote control direct button "I/P-SCAN".
Notes:
If you use a conventional TV and you select "P-SCAN" from remote control direct button "I/P-SCAN", the TV screen will become blur (not clear).
P-SCAN mode only can activate if video output setting change to YP
If Video Output setting is on SCART or S-VIDEO mode, P-Scan can't be activate, "STOP" (hand) sign will appear on TV screen when press "I/P-Scan" button on remote
control.
Setup menu
GENERAL SETUP
SPEAKER SETUP
(*1) Selects the dynamic range compression to fit the individual listening situation of the audience. This function can be used in DVD playback.
Depending on the disc, sounds may become too loud or inaudible during playback. Dolby Digital's dynamic range control allows you to adjust the sound range.
Caution:
Make sure the unit is on the STOP condition before changing the interlace or P-Scan (Progressive Scan) mode.
(*2) What is DivX
®
VOD?
DivX
®
Video-on-Demand (VOD) is a digital video for internet delivery service that allows you to download and enjoy high-quality video content from a diverse group of
DivX
®
content partners to a CD and play it on SHARP's HT-CN410DVH DivX
E-20
P
mode.
B
R
Selectable parameters (*indicates default setting)
TV DISPLAY
4:3 PS*
4:3 LB
16:9
VIDEO OUTPUT
SCART*
YP
S-VIDEO
ANGLE MARK
ON*
OFF
OSD LANGUAGE
ENGLISH*
FRENCH
GERMAN
ITALIAN
SPANISH
SCREEN SAVER
ON*
OFF
CENTER DELAY
1 MS to 5 MS
OFF*
REAR DELAY
3 MS to 15 MS
OFF*
TEST TONE
ON
OFF*
®
certified DVD player.
The screen mode should be set according to the connected TV type
(for details, see page 22).
Select "S-VIDEO" mode if connect DVD main unit (S-VIDEO output
socket) to TV (S-VIDEO input socket) (for details, see page 12).
Select "YP
P
" mode if connect DVD main unit (component video
B
R
P
B
R
output sockets, YP
P
) to TV (component video input sockets with
B
R
Progressive-scan capability) (for details, see page 14,15).
You can select the desired OSD (On Screen Display) language for
the setup menu or playback control screen.
A screensaver appears.
The screensaver is disabled.
Adjust the delay time of the speakers (for details, see page 47).
You can check the sound output from the speakers (for details, see
page 48).
03/10/29
HTCN410DVH 8_E2.fm
Description
Hide quick links:
Advertisement
Table of Contents
