Gigabyte GA-Z68AP-D3 User Manual page 41

tRTP
Options are: Auto (default), 1~15.
tFAW
Options are: Auto (default), 1~63.
Command Rate(CMD)
Options are: Auto (default), 1~3.
>>>>> Channel A/B Misc Timing Control
IO Latency
Options are: Auto (default), 1~31.
Round Trip Latency
Options are: Auto (default), 1~255.
 Advanced Voltage Settings
CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
****** Mother Board Voltage Control ******
Voltage Types
-----------------------------------------------------------------------------
>>> CPU
Multi-Steps Load-Line
CPU Vcore
x Dynamic Vcore(DVID)
QPI/Vtt Voltage
System Agent Voltage
Graphics Core
x Graphics DVID
>>> MCH/ICH
CPU PLL
DRAM Voltage
DRAM VRef.
DRAM Termination
Ch-A Data VRef.
Ch-B Data VRef.
hi: Move Enter: Select
F5: Previous Values
CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
Ch-A Address VRef.
Ch-B Address VRef.
hi: Move Enter: Select
F5: Previous Values
Advanced Voltage Settings
Normal Current
[Disabled]
1.205V [Auto]
+0.000V Auto
1.050V [Auto]
0.925V [Auto]
1.010V [Auto]
+0.000V Auto
1.800V [Auto]
1.500V [Auto]
0.750V [Auto]
0.750V [Auto]
0.750V [Auto]
0.750V [Auto]
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
Advanced Voltage Settings
0.750V [Auto]
0.750V [Auto]
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
- 41 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup