Gigabyte GA-Z68AP-D3 User Manual page 11

Storage Interface Chipset:
Š
- 2 x SATA 6Gb/s connectors (SATA3 0, 1) supporting up to 2 SATA 6Gb/s
devices
- 3 x SATA 3Gb/s connectors (SATA2 2~4) supporting up to 3 SATA 3Gb/s
devices
- 1 x mSATA connector
- Support for RAID 0, RAID 1, RAID 5, and RAID 10
* When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s channels, the system
USB Chipset:
Š
- Up to 10 USB 2.0/1.1 ports (4 ports on the back panel, 6 ports available
through the internal USB headers)
Etron EJ168 chip:
Š
- Up to 2 USB 3.0/2.0 ports on the back panel
Internal 1 x 24-pin ATX main power connector
Š
Connectors 1 x 4-pin ATX 12V power connector
Š
2 x SATA 6Gb/s connectors
Š
3 x SATA 3Gb/s connectors
Š
1 x mSATA connector
Š
1 x CPU fan header
Š
2 x system fan headers
Š
1 x power fan header
Š
1 x front panel header
Š
1 x front panel audio header
Š
1 x S/PDIF Out header
Š
3 x USB 2.0/1.1 headers
Š
1 x clearing CMOS jumper
Š
1 x Trusted Platform Module (TPM) header
Š
Back Panel 1 x PS/2 keyboard/mouse port
Š
Connectors 1 x parallel port
Š
1 x serial port
Š
1 x optical S/PDIF Out connector
Š
1 x HDMI port
Š
4 x USB 2.0/1.1 ports
Š
2 x USB 3.0/2.0 ports
Š
1 x RJ-45 port
Š
3 x audio jacks (Line In/Line Out/Microphone)
Š
I/O Controller iTE IT8728 chip
Š
performance of the RAID set may vary depending on the devices being connected.
- 11 - Hardware Installation