Care; Contact With Liquid; Operation With A Pabx - Siemens Gigaset CL100 Operating Manual

Care

Wipe the base station and handset with a damp cloth or with an antistatic wipe. Never
use a dry cloth. This can cause static.

Contact with liquid

If the handset should come into contact with liquid, on no account switch the device
on. Remove all batteries immediately.
Allow the liquid to drain out of the device, and then pat all parts of the device dry.
Keep the handset with the batteries removed in a warm, dry place for at least 72 hours.
In many cases, you will then be able to use it again.

Operation with a PABX

The following settings are only necessary if your PABX requires them, please refer to
the operating instructions for your PABX.
Changing the dialling procedure
You can set the dialling mode to tone dialling (DTMF) or pulse dialling (IWV).
¢
MENU BASE SET
a
Press and hold (return to idle status).
Temporary switch to tone dialling (DTMF):
If your PABX works with pulse dialling but you need tone dialling for a call (e.g. to listen
to an external mail box), you must switch to pulse dialling during the call.
¢
MENU TEMP TONE
Setting the flash time
¢
MENU BASE SET
120 ms, 180 ms, 250 ms, 300 ms or 600 ms)
a
Press and hold (return to idle status).
Changing pause after line seizure
Setting the length of the pause between pressing the talk key
phone number (1 = 1 sec.; 2 = 3 secs.; 3 = 7 secs.; 4 = 2.5 secs., factory setting: 3 secs.).
¢
N O 1 L
MENU
pause length flashes
Changing pause after recall key (dialling pause)
Setting the length of the dialling pause (1 = 800 ms; 2 = 1600 ms; 3 = 3200 ms, see
operating instructions for the PABX).
¢
N O 1 2
MENU
pause length flashes
To insert a dialling pause press the
i
entered the prefix. A "P" appears in the display. Then enter the phone
number.
!
¢ ¢
ADD FEATURES
¢ ¢
ADD FEATURES
¢
Display symbol: 916 SET, the number for the current
¢
enter a new number
¢
Display symbol: 912 SET, the number for the current
¢
enter a new number
¢
Select dialling mode
DIAL MODE
¢
Select flash time (80 ms, 100 ms,
TBR
¢
OK
c
¢
OK
¢
OK
S
key for 2 seconds after you have
Appendix
¢
OK
and sending the
23