Table of Contents
Advertisement
Manually registering the E500H handset
You must manually register the handset on both the handset (1) and
the base (2).
1) On the handset
¤ Settings ¤ Registering ¤ Register Handset
§Menu§
If the handset is already registered to four bases:
s
Select base, e.g., 3 and press
~
If required, enter the system PIN for the base and
press
The display shows Handset is registering.
2) On the base
¤ Within 60 seconds, press and hold the registration/paging key
on the base (approx. 3 seconds).
A Gigaset E500H handset can be registered on up to four bases.
After it has registered, the handset returns to idle status. If it does
not appear, repeat the procedure.
Please note
For instructions on deregistering the handsets, please consult
the base user guide.
§OK§
.
§OK§
.
First steps
15
Advertisement
Table of Contents
