Table of Contents
Advertisement
The FL8550's advanced programming
capability enables you to preset the order
in which tracks play, repeat specific discs
or tracks, repeat all discs and tracks,
and/or repeat any portion of a specific disc.
Programmed Play
Programmed play allows you to program
up to 32 tracks or complete-disc play-
through into the FL8550's memory.
To begin programming the FL8550,
press the
button
) n
Program
followed by the
button
$ h
Play
The
indicator will light in
PROGRAM
the
Information Display Ô
.
You may now begin to enter the discs and
tracks in the order in which you wish to
have them play. Once the
PROGRAM
indicator is lit,
will appear in the
P-01
Information Display, replacing the track
time. This indicates that you are about to
program the first track.
Programmed Play Operation
14
Press the
Disc Select
choose the first disc to be programmed,
and note that
will flash in the
A L L
Information Display. To have all tracks
on the disc play in order as the first pro-
gram step, press the
Program
n
. To select a single track on the disc,
press the
buttons
Numeric
corresponding to the desired track. You
may also use the
Skip
to select a track.
,
When the disc and track are selected,
.
press the
button
Program
that the program step indication on the
right side of the Information Display will
change to
. You may now select
P-02
another disc and/or track for the next
program step following the instruction
shown above. When the program step is
selected, press the
Program
n
. Repeat this procedure for each pro-
gram step until you have completed the
desired programming. Press the
button
% g
to complete a program
sequence, or press
Play $ h
immediate play of a program sequence.
If the maximum of 32 program steps is
reached, the program step indication at
the right side of the Information Display
will go out, and the disc and track that
have been programmed as the first
program step will be shown.
button
( b
to
Once a program list has been played,
press the
Play
listening to the sequence. After the entire
program has been played, the FL8550 will
stop. As long as the
button
)
has not been pressed, and the
indicator remains lit, you may repeat the
c
programmed play sequence again by
pressing the
buttons
^ f
Pressing the
opening the disc drawer by pressing the
Open/Close
) n
. Note
the FL8550 off will erase the program
information from the unit's memory.
Checking Program Contents
To check the contents of a program
while the unit is stopped, press the
button
)
buttons
^ f
Display will step through each of the
programmed discs and tracks.
Stop
Clearing Programs
to begin
When the unit is stopped, but the
indicator is still lit, you may clear the entire
contents of a program by pressing the
button
Clear
button
$ h
to begin
button
% g
Stop
PROGRAM
button
$ h
.
Play
button
% g
,
Stop
button
! a
or turning
Skip
and the Information
PROGRAM
9 m
.
Hide quick links:
Advertisement
Table of Contents
