Connecting The Base Station; To Pabx; Dialling Modes And Recall; Saving An Access Code - Siemens Gigaset S670 User Manual

Connecting the base station to PABX

Connecting the base station

to PABX

The following settings are only necessary
when your PABX requires them; see the
PABX user guide.
You cannot send or receive SMS messages
on PABXs that do not support Calling Line
Identification.

Dialling modes and recall

The current setting is indicated by
Changing the dialling mode
The following dialling modes can be
selected:
u
Touch tone dialling (DTMF)
u
Pulse dialling (DP)
¢ ¢ ¢
v Ð
Base
¢
Dialling Mode
s
Select dialling mode (
and press
a
Press and hold (idle status).
Setting recall
¢ ¢ ¢
v Ð
Base
¢
Recall
s
Select flashing time (
and press
a
Press and hold (idle status).
56
‰
.
Add. Features
‰
= on)
.
§OK§
Add. Features
‰
= on)
.
§OK§

Saving an access code

(outside line code)

Precondition: You may have to enter an
access code for external calls in your PABX,
e.g. "0".
¢ ¢ ¢
v Ð
Base
¢
Access Code
~
Enter or change access code,
max. 3 digits.
¤
Save changes: (page 63).
If an access code has been saved,
u
The access code is prefixed automati-
cally when you select from the follow-
ing lists: numbers of the SMS centres,
call history or answer machine list.
u
The access code must be entered when
dialling manually and when manually
entering directory, emergency/quick
dial numbers and SMS centre numbers.
u
If you copy the recipient's number from
the directory when sending an SMS,
you have to delete the access code.
u
An existing access code is deleted
using X.
Add. Features