Handset Settings; Quick Access To Numbers And Functions - Siemens Gigaset S790 User Manual

Handset settings

Sensitivity:
Select noise level sensitivity (Low or
High).
¤
§Save§
Press to save the settings.
When the room monitor function is acti-
vated, the idle display appears as shown
below:
i à V
07:15
Á
INT 1 22 Oct
Room Monitor
0891234567
OFF Options
Changing the set destination
number
É
¢ ¢
v
Room Monitor
¤
Enter and save number as described in
"Activating the room monitor and enter-
ing the destination number"
¢
( page 61).
Cancel/deactivate room monitor
Press the end call key a to cancel the call
when the room monitor is activated.
In idle status, press the display key
deactivate room monitor mode.
Deactivating the room monitor
remotely
Prerequisites: The phone must support tone
dialling and the room monitor should be set
for an external destination number.
¤
Accept the call from the room monitor
and press keys 9 ;.
The room monitor function will deactivate
after the call ends. There are no further room
monitor calls. The other room monitor set-
tings on the handset (e.g., no ringtone) will
remain activated until you press the display
§OFF§
key on the handset.
62
To reactivate the room function with the
same phone number:
¤
Turn on the activation again and save
with
Handset settings
Your handset is preconfigured, but you can
change the settings to suit your individual
requirements.
Quick access to numbers and
functions
You can assign a number from the directory
to each of the digit keys Q and 2 to
O.
The left and right display keys have a default
function. You can change the assignment
¢
( page 63).
The number is then dialled or the function
started by simply pressing a key.
Assigning digit keys
Prerequisite: You have not yet assigned a
number to the digit key.
¤
Press and hold the digit key
or
Press the digit key briefly and press the
§OFF§
to
display key
The directory opens.
¤
Select an entry and press
The entry is saved to the corresponding digit
key.
If you delete or edit the entry in the direc-
tory at a later date, this will not affect the
assignment to the number key.
¢
§Save§
( page 61).
§QuickDial§
.
Please note
§OK§
.