Siemens Gigaset S68H User Manual page 27

Handset settings
Registering Bluetooth devices
The distance between the handset in Blue-
tooth mode and the activated Bluetooth
device (headset or data device) should be
no more than 10 m.
Please note:
– If you register a headset, any headset that is
already registered will be overwritten.
– If you would like to use a headset with your
handset that is already registered to
another device (e.g. to a mobile phone),
please deactivate this connection before
you start the registration process to the
Gigaset.
¢ ¢
v í
Data Transfer
¢
/
Search Headset Search Data Device
The search can take up to 30 seconds.
Once the device has been found, its name
will be shown on the display.
Press the display key.
§Options§
Select and press
Trust Device
~
Enter the PIN for the Bluetooth
device you want to register
and press
The device is saved in the list of known
devices.
Cancelling/repeating current search
To cancel search:
Press the display key.
§Cancel§
Repeat search if necessary:
Select and press
§Options
Repeat Search
Select and press
26
¢
Bluetooth
.
§OK§
.
§OK§
.
§OK§
.
§OK§
Editing the list of known (trusted)
devices
Open list
¢ ¢
v í
Data Transfer
¢
Known Devices
A corresponding icon appears next to each
device name in the list displayed:
Icon Meaning
ô
Bluetooth headset
õ
Bluetooth data device
Viewing entries
¢
s (select entry)
Open list
Press the display key.
§Options§
View Entry Select and press
Device name and address are
displayed.
Back with
Deregistering a Bluetooth device
¢
s (select entry)
Open list
Press the display key.
§Options§
Delete Entry Select and press
a
Back: press and hold key.
Please note:
If you deregister an activated Bluetooth device,
it may try to reconnect as an "unregistered
device".
Changing the name of a Bluetooth device
¢
s (select entry)
Open list
Press the display key.
§Options§
Rename Select and press
~
Change name
Press the display key
Save
a
Back: Press and hold key.
¢
Bluetooth
.
§OK§
.
§OK§
.
§OK§
.
§OK§