Heatsink Retention Frame Installation - TYAN TOMCAT N3400B Manual

2.5 - Heatsink Retention Frame Installation

After you are done installing the processor, you should proceed to install the
retention frame and heatsink. The CPU heatsink will ensure that the processor do
not overheat and continue to operate at maximum performance for as long as you
own them. The overheated processor is dangerous to the motherboard.
The backplate assembly prevents excessive motherboard flexing in the area near
the processor and provides a base for the installation of the heatsink retention
bracket and heatsink.
Because there are many different types of heatsinks available from many different
manufacturers, a lot of them have their own methods of installation. For the safest
method of installation and information on choosing the appropriate heatsink, use
heatsinks validated by AMD. Please refer to AMD's website at www.amd.com.
The following diagram will illustrate how to install the most common CPU back
plates:
22
http://www.tyan.com
1. Mounting screws
2. Heatsink retention frame
3. CPU socket
4. Motherboard PCB
5. Adhesive insulator
material
6. Backplate assembly
NOTE: Please see next
section for specific
instructions on how to install
mounting bracket.