Table of Contents
Advertisement
Step 3 > Choose a Configuration Method
Option B> Macintosh Configuration
The steps required to setup your system for using the Gigaset® depend on whether you use
a PC or a Macintosh. Select the appropriate option for your system.
Option A > Configure the PC
1: Configuring Windows®
To setup the Gigaset® device, you must first
configure your PC to obtain an IP address
from a DHCP server. Follow the procedure
below:
Note: The following procedures are for a PC
running Windows XP. Please refer to the
User Guide on the CD-ROM for help
configuring other operating systems.
1. Click Start > Control Panel.
2. Double-click the Network Connections
icon.
3. Double-click your Network Card.
4. Click Properties.
5. Select Internet Protocol (TCP/IP).
6. Click Properties.
7. Select Obtain an IP address automatically.
8. Select Obtain DNS server address
automatically.
9. Click OK and exit out of the Control Panel.
10. Configure Internet Access using the
procedure that follows.
6
2: Configuring Internet Access
Next, use the procedure below to make sure
your PC will use the Gigaset device (and not
Dial-up Networking) when connecting to the
Internet.
1. Click Start > Control Panel.
2. Double-click the Internet Options icon.
3. Click the Connections tab.
4. Click Setup.
5. Click Next.
6. Click Connect to the Internet.
7. Click Next.
8. Click Setup my connection manually.
9. Click Next.
10. Select Connect using a broadband
connection that is always on.
11. Click Next.
12. Click Finish.
13. Configure the Gateway using the
procedure Configuring the Gateway.
Hide quick links:
Advertisement
Table of Contents
