Step 2 > Choose An Installation Method - Siemens Gigaset SE567 Quick Start Manual

Step 2 > Choose an Installation Method
The Gigaset SE567 device can only be connected to an Ethernet port; the Gigaset SE568
can be connected to an Ethernet or a USB port. To connect using an Ethernet port,
complete the steps in Option A. To connect to a USB port, complete the steps in Option B.
Option A > Ethernet Installation Method
If your computer does not have an Ethernet
Adapter installed, install it now. Refer to your
Ethernet Adapter manufacturers documentation
for complete installation instructions.
Connect the Gigaset® Device
1. Connect the Ethernet cable (RJ-45) to the
Ethernet port on the Gigaset device (yellow
port).
2. Connect the other end to the Ethernet
port on your computer.
3. Plug the DSL cable (RJ-11) into the DSL port
on the Gigaset device (gray port).
4. Plug the other end of the DSL cable (RJ-11)
into the phone jack.
5. Plug the power adapter into the power outlet
and the Gigaset device (black port).
6. Ensure that the Gigaset device is powered on.
The power switch is on the right side of the back
panel.
4
You have completed the installation of your Gigaset
hardware. There is no software installation required
when using an Ethernet connection. If you have the
router model, proceed to Step 3 to configure your
router and connect to the Internet.
Internet
4 Connection
3
RJ-11 DSL Cable
2
Ethernet Connection
to Computer RJ-45
Straight-through
Ethernet cable
1
5
6
Power
Supply
Hub
Optional: Use Crossover
(Xover) cable when connecting
a hub or switch without an
"uplink" port