Sharp AQUOS LC-40LE822E Operation Manual page 31

Basic adjustment
Picture
Advanced
This TV provides various advanced functions for
optimising the picture quality.
Go to "Menu" > "Setup" > "Picture" >
"Advanced".
C.M.S.-hue
This function adjusts the hue of a selected colour using a
six-colour adjustment system.
C.M.S.-saturation
This function increases or decreases the saturation of a
selected colour using a six-colour adjustment system.
C.M.S.-value
This function adjusts the brightness of a selected colour
using a six-colour adjustment system.
Colour temp.
Adjusts the colour temperature to give the best white
image.
High White with bluish tone.
Intermediate tone between "High" and
Mid-High
"Middle".
Middle Natural tone.
Intermediate tone between "Middle"
Mid-Low
and "Low".
Low White with reddish tone.
R/G/B Gain (LO), Adjusts the white balance by changing
R/G/B Gain (HI) the value of each item.
Fine motion advanced
"Fine motion advanced" technology provides superior
solutions for digital display picture quality removing
motion blur ("High", "Low", "Off").
NOTE
• This effect is greater on fast moving images.
• "Fine motion advanced" will have no effect in the following
cases.
1) The type of signal received is a PC signal.
2) An OSD is being displayed.
3) Teletext is activated.
• If images appear blurred, set the "Fine motion advanced" to
"Off".
Gamma adjustment
Selects the tone difference of the brightness and
darkness of the image according to the type of
programme watched from a maximum of e 2 to a
minimum of f 2.
Item
Film mode
Automatically detects a film-based source (originally
encoded at 24 or 25 frames per second, depending on
the vertical frequency), analyses it and then recreates
each still film frame for high-definition picture quality
("Advanced (High)", "Advanced (Low)", "Standard", "Off").
Active contrast
Automatically adjusts the contrast of an image according
to the scene.
DNR
"DNR" produces a clearer image ("Auto", "High",
"Middle", "Low", "Off").
NOTE
This function may not be available depending on the input
•
signal type.
3D-Y/C
Provides high quality images with minimal dot crawl and
cross colour noise by detecting changes in the image.
Standard Normal adjustment.
Sets the optimum image quality for fast-
Fast
moving images.
Sets the optimum image quality for
Slow
slow-moving images.
NOTE
• "3D-Y/C" may not operate depending on the input signal type
or when the input signal is noisy.
"3D-Y/C" has even more effect on composite video signals
•
(CVBS).
Monochrome
For viewing a video in black & white.
Range of OPC
The brightness level range of the OPC sensor's automatic
adjustments can be set according to your preferences.
The adjustment range of the OPC sensor can be set to a
maximum of e 16 and a minimum of f 16.
NOTE
• This function is available only when the "OPC" setting is set to
"On" or "On:Display".
• The maximum setting cannot be set to a smaller number than
the minimum setting.
• The minimum setting cannot be set to a bigger number than
the maximum setting.
• The maximum and minimum settings cannot be set to the
same number.
• Depending on the brightness of the surrounding light, the OPC
sensor might not operate if the adjustment range is small.
Item
29