Method Of Connecting External Equipment And The Video Controller - Sharp AQUOS LC-15L1E Operation Manual

Method of Connecting External Equipment and the Video Controller

I Place where Wireless Centre is installed
Wireless Centre should be placed on or beside video equipment. However, make sure that the Wireless Centre is as far as
possible away from the antenna input terminal of a television or video equipment.
A maximum of two items of video equipment can be operated using the video controller.
AUDIO OUT
CO-
DIGITAL
R
AXIAL
AUDIO
L
OPTICAL
S-VIDEO R
VIDEO
L
To S-VIDEO output terminal
S-video cord
(commercially available)
When connecting to
equipment with
an S-video terminal.
Video controller (supplied)
(The video controller should be
fixed with the accessory tape once
the place where it is to be installed
has been decided.)
Installation
example
VCR etc.
Front
Infrared receiver of the remote
control (an example)
I Cautions regarding installation of video controller
The position of the infrared receiver of the remote control varies depending on the manufacturer or the type of the video
•
cassette recorder. Generally, it is a small round-shaped part close to the liquid crystal display portion.
Make sure that the transmitter of the video controller is facing the infrared receiver of the remote control.
•
When installing the video controller, try first to transmit remote control signals from the equipment connected with the Wireless
•
Centre to the main unit to find a position where the connected equipment can be operated.
Note:
Note:
Regarding S-VIDEO terminal
• When VIDEO input/output and S-VIDEO input/output are connected at the AV3/AV4 input/output of this unit at the same time, S-VIDEO
input/output has priority over the other.
Regarding video controller
• Connect VIDEO terminal and AUDIO output terminals of equipment to play an image to VIDEO terminal and AUDIO input terminals on the
Wireless Centre respectively. After that, connect the video controller to the video control terminal of Wireless Centre.
• When installing video controller, make sure that this transmitter is facing the infrared receiver of the remote control for the connected
equipment. It is possible to operate a connected equipment by facing the remote control for the equipment connected to the Wireless
Centre towards the infrared receiver of the remote control for the main unit (TV unit) and pressing the button.
To Audio/Video
output terminal
IN
ANT
( Red )
Audio/Video cord
R
(commercially available)
AUDIO
( White )
L
TV
( Yellow )
VIDEO
Connect to the terminal
of the same colour.
Rear
Wireless Centre
IN
OUT
The video controller is fixed so that
the transmitter of the video controller
faces the infrared receiver of the remote
control for the video equipment.
AC cord
Connecting External Devices (Continued)
AV-IN3
VIDEO
AV-IN2 ( AV )
L AUDIO
AV-IN3
R
AV-IN1 ( RGB )
To AV-IN1 (RGB)
terminal
AC wall outlet
Decoder
To input/output terminal
DVD player
To Audio/Video
output terminal
IR POWER FACTORY
MOUSE INPUT SETTING
DC12V
S-VIDEO
AC adapter
AC cord*
* Product shape varies in some countries.
AC wall
outlet
45