Getting To Know Your Machine; Control Panel; Detergent Dispenser Drawer; Rinse Hold Button - Tricity Bendix CWD1010 Operating And Installation Instructions

GETTING TO KNOW YOUR MACHINE

Control panel

COTTONS - LINENS
1 WHITES WITH PREWASH
95
2 WHITES 95
3 FAST COLOUREDS
60
4
NON FAST COLOUREDS 40
5 RINSES
6
SPIN 1000
7 FULL HEAT DRYING
SYNTHETICS
8 MIXED FABRICS
50
9
SPIN 850
CWD 1010
10 HALF HEAT DRYING
IMPORTANT: PLEASE READ THE INSTRUCTION BOOK BEFORE USE.

1 Detergent dispenser drawer

C0026
2 Mains-on light
This light illuminates when the machine starts working
and goes out when the ON/OFF button is released.
3 ON/OFF button
By depressing this button the machine starts operating.
When depressing it again, the machine stops.

4 Half load button

Select this button to reduce water consumption on the
rinse cycle when washing a smaller load of cottons or
linens (maximum load size = 2.25 kg).
DELICATES - WOOL
11 DELICATES
40
12 WOOL WASH 40
13 QUICK & COOL WASH
30
14 RINSES
15 DRAIN
1 2
Symbols
Prewash
Wash
Fabric softener
rpm
1OOO
MAINS HALF RINSE
ON LOAD HOLD
two
ONE
I N
WASHER DRYER
3 4 5 6

5 Rinse hold button

Press this button to make the machine stop with water in
the drum after the synthetic or delicate wash cycles.
This prevents any creasing which may take place if the
clothes are left damp in the drum. When it is convenient
for you to empty the machine, simply press this button
again so that the machine can proceed to drain and
spin, or turn the dial to the drain programme "15".
If this button is not activated, the washing programmes
will end with a short spin.
Do not press this button for woollens: wool items should
be gently spun.
The Rinse Hold button must not be depressed when
using NON-STOP operation (automatic washing and
drying).

6 Drying indicator light

This light illuminates when the machine is drying.

7 Drying time selector dial

Graduated up to 120 mins for cottons and synthetics,
this dial allows you to select the desired drying time
according to the type and quantity of laundry and the
required degree of dryness.
Turn the dial clockwise only.
Cooling phase
To allow the laundry to cool down, a cooling phase starts
automatically 8 minutes before the end of drying and this
phase must in no circumstances be reduced or interrupt-
ed.

8 Programme selector dial

With the programme selector dial you choose the
desired washing and drying programme. Turn it clock-
wise.
Before setting the dial to any position the machine must
be switched off by depressing the ON/OFF button.
DRYING TIME SELECTOR
7 8
5
Ec o
7