Getting To Know Your Machine; Control Panel; Detergent Dispenser Drawer; Rinse Hold Button - Tricity Bendix BA 450 Operating & Installation Instructions Manual

GETTING TO KNOW YOUR MACHINE

Control panel

1

1 Detergent dispenser drawer

P0239
2 Mains-on light
This light illuminates when the machine starts working
and goes out when the ON/OFF button is released.
3 ON/OFF button
By depressing this button the machine starts operating.
When depressing it again, the machine stops. The push
button is provided with a child-proof safety lock. Move
the small slider placed in the middle of the button down-
wards to lock the button in the «off» position.

4 Half load button

Select this button to reduce water consumption on the
rinse cycle when washing a smaller load of cottons or
linens (maximum load size = 2.25 kg).
8
MAINS ON
2
Symbols
Prewash
Wash
Fabric softener
ON/OFF HALF RINSE QUICK
LOAD HOLD WASH
3 4 5 6

5 Rinse hold button

Press this button to make the machine stop with water in
the drum after the synthetic or delicate wash cycles.
This prevents any creasing which may take place if the
clothes are left damp in the drum. When it is convenient
for you to empty the machine, simply press this button
again so that the machine can proceed to drain and
spin, or turn the dial to the drain programme "13".
If this button is not activated, the washing programmes
will end with a short spin.
Do not press this button for woollens: wool items should
be gently spun.
The Rinse Hold option must not be selected when
using NON-STOP operation (automatic washing and
drying).
6 Quick wash button
By depressing this button on programmes 2, 3, 4 and 7
the wash time will be reduced by approx. 20 mins.
This is suitable only for garments which are lightly soiled.

7 Programme selector dial

With the programme selector dial you choose the
desired washing programme. Depress the dial to pop it
out and turn it clockwise.
Before setting the dial to any position the machine must
be switched off by depressing the ON/OFF button.
7