Sharp XL-MP9H Operation Manual page 28

Advanced disc playback (continued)
XL-MP9H
ENGLISH
" Programmed play
You can choose up to 32 selections for playback in the order you
like.
1
Whilst in the stop mode, use the
direct search buttons to select the
desired track.
You can also select a track by pressing the
2
Press the SHIFT button and then
the MEMORY button to save the
track number.
! When the track is memorised, "MEMORY" will appear.
! On the main unit, press the MEMORY/SET button.
3
Repeat steps 1 - 2 for other tracks. Up to 32 tracks can be
programmed.
If you make a mistake, the programmed tracks can be cleared
by pressing the SHIFT button and then the CLEAR button.
! On the main unit, press the CLEAR button.
4
Press the button to start playback.
To clear the programmed selections:
Whilst the "MEMORY" indicator is lit, set the CD to the stop mode,
then press the SHIFT button and then the CLEAR button.
! On the main unit, press the CLEAR button.
Each time the button is pressed, one track will be cleared, beginning
with the last track programmed. When all the tracks are cleared,
"MEMORY" will disappear.
Adding tracks to the programme:
If a programme has been previously stored, the "MEMORY" indica-
tor will be displayed. Then follow steps 1 - 2 to add tracks. The new
tracks will be stored after the last track of the original programme.
E-17
Notes:
! The programmed sequence is cancelled when the disc is
removed.
! If you press the ON/STAND-BY button to enter the stand-by
mode or change the function from CD to another, the pro-
grammed selections will not be cleared.
! During the programme operation, random play is not possible.
! For CD-R/RW discs recorded in the MP3 or WMA format, you
can select the track number but cannot select the folder by press-
Selected track number
ing the direct search buttons.
or button.
Playback order
To use the operation lever on the unit, move it
toward the corresponding directions.
05/5/23 XL-MP9H(H)E2.fm
TINSZA058SJZZ