Troubleshooting Chart; Headphone Socket - Sharp XL-HP550E Operation Manual

Micro component system
Table of Contents

Advertisement

! To record on a tape
1
Insert a cassette in the cassette compartment.
2
Press the VIDEO/AUX button.
3
Press the
button.
4
Press the
/
( ) or
button.
5
Play the VCR, DVD, etc.
! Headphones
" Before plugging in or unplugging the headphones, reduce the
volume.
" Be sure your headphones have a 3.5 mm (1/8") diameter plug
and are between 16 ohms and 50 ohms impedance. The recom-
mended impedance is 32 ohms.
" Plugging in the headphones disconnects the speakers automati-
cally. Adjust the volume using the VOLUME control.

Troubleshooting chart

Many potential problems can be resolved by the owner without call-
ing a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.
! General
Symptom
" The clock is not on time.
" Did a power failure occur? Reset
the clock. (Refer to page 16.)
" When a button is pressed,
" Set this unit to the power stand-
the unit does not respond.
by mode and then turn it back on.
" If the unit still malfunctions, reset
it. (Refer to page 31.)
" No sound is heard.
" Is the volume level set to "0"?
" Are the headphones connected?
" Are the speaker wires discon-
nected?
! CD player
Symptom
" Playback does not start.
" Is the disc loaded upside down?
" Playback stops in the mid-
" Does the disc satisfy the stan-
dle or is not performed
dards?
properly.
" Is the disc distorted or
scratched?
" Playback sounds are
" Is the unit located near excessive
skipped, or stopped in the
vibrations?
middle of a track.
" Is the disc very dirty?
" Has condensation formed inside
the unit?
02/8/7
XL-HP550E(E)3.fm
XL-HP550E
Possible cause
Possible cause
29

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents