Specifications
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
! General
Power source
AC 230 V, 50 Hz
Power
Power on: 100 W
consumption
Power stand-by: 0.6 W (*)
Dimensions
Width: 185 mm (7-1/4")
Height: 260 mm (10-1/4")
Depth: 307 mm (12")
Weight
6.0 kg (13.2 lbs.)
( * )This power consumption value is obtained when the demonstra-
tion mode is cancelled in the power stand-by mode. Refer to
page 9 to cancel the demonstration mode.
! Amplifier
Output power
PMPO: 364 W
MPO: 182 W (91 W + 91 W) (DIN 45 324)
RMS: 100 W (50 W + 50 W) (DIN 45 324)
RMS: 76 W (38 W + 38 W) (DIN 45 500)
Output terminals
Speakers: 6 ohms
Headphones: 16 - 50 ohms (recommended:
32 ohms)
Subwoofer pre-output (audio signal):
200 mV/10 k ohms at 70 Hz
Input terminals
Video/Auxiliary (audio signal): 500 mV/47 k
ohms
! CD player
Type
5-disc multi-play compact disc player
Signal readout
Non-contact, 3-beam semiconductor laser
pickup
D/A converter
1-bit D/A converter
Frequency
20 - 20,000 Hz
response
Dynamic range
90 dB (1 kHz)
! Tuner
Frequency range
FM: 87.5 - 108 MHz
AM: 522 - 1,620 kHz
! Cassette deck
Frequency
50 - 14,000 Hz (normal tape)
response
Signal/noise ratio
50 dB (recording/playback)
Wow and flutter
0.35 % (DIN 45 511)
! Speaker
Type
2-way type speaker system
5 cm (2") tweeter
13 cm (5-1/8") woofer
Maximum input
100 W
power
Rated input power
50 W
Impedance
6 ohms
Dimensions
Width: 165 mm (6-1/2")
Height: 261 mm (10-1/4")
Depth: 230 mm (9-1/16")
Weight
2.6 kg (5.7 lbs.)/each
03/10/30
XL-HP404H(H)E3.fm
XL-HP404H
ENGLISH
8
E-38
TINSZA004AWZZ