Radio Basics - Panasonic CQ-RD132N Operating Instructions Manual

Radio Basics

E
N
G
L
q
I
Mode Selection
S
H
You can switch to the radio mode as shown below.
3
From: Tape Mode
CD Changer Mode
w
Band
Press [BAND] to change the
bands.
Band
e
Manual Tuning
[}TUNE] : Higher frequency
[{TUNE] : Lower frequency
Seek Tuning
Press and hold for more than 0.5
seconds then release.
[}TUNE] : Higher frequency
[{TUNE] : Lower frequency
Tuning will automatically stop when
the signals of the next broadcast
station are received.
8
CQ-RD152/RD142/RD132N
Eject a tape.
Press [BAND].
FM1
FM2
FM3
AM (LW/MW)
FM stereo indicator
TUNE TUNE
VOL
CQ-RD152N
SEL CD-C BAND CD-C BAND BAND
APM
TRACK TRACK
1
MUTE
r
Mono/Local Selection (MONO/LOC)
MONO :
LOCAL : Only strong signals of stations are searched for in seek
FM broadcasts
Press and hold [PTY] (MONO/
LOC) to change the mode.
Release when at the desired point.
MONO OFF / LOCAL OFF
MONO ON / LOCAL OFF
MONO ON / LOCAL ON
MONO OFF / LOCAL ON
CASSETTE RECEIVER
SCAN REPEAT
2 3 4 5 PTY PTY
DISP
Noise is significantly decreased when weak signals are
received from an FM broadcast station.
tuning, while at the LOCAL OFF setting, relatively weak
signals are also searched for.
AM broadcast
Press and hold [PTY] (MONO/LOC)
to switch LOCAL mode on and off.
PRG
TA
PWR
AF
EON E PTY C T E
REG
LOCAL OFF
LOCAL ON