Controls Layout; Preparation (Acc Setting Etc.); Main Unit; Remote Control Unit - Panasonic CQ-C3305N Operating Instructions Manual

Controls Layout

Note: This instruction manual explains operations for use with the buttons on the main unit. (Different operations excluded)
( page 12)
BAND SOURCE
Play/Pause
PWR Power
( page 18, 20)
APM Auto Preset Memory
TA Traffi c Announcement
( page 13)
AF Alternative Frequency
VOL Volume
( page 11)
PUSH SEL Select
( page 24, 26)
Remote control sensor
( page 12)
TUNE
TRACK (FILE) ( page 18, 20)
MUTE ( page 11)
SQ Sound Quality ( page 25)
Notes:
• Remote Control Unit for CQ-C3305N is option (CA-RC80N).
• The optional remote control is available from your local dealer. (CA-RC80N)
Power
Mode
(Source)
Band
Pause
8
CQ-C3305N
( page 11) ( P16 of System Upgrade Guidebook)
LIST
( page 10) DISC ( P12 of System Upgrade Guidebook)
FOLDER ( page 20)
( page 16)
( page 15)
DISP Display ( page 10) OPEN (
PTY Programme Type
( page 17)
1 to 6 ( page 12) AUX1
3 (SCROLL) ( page 19, 21)
4 (RANDOM) ( page 19, 21)
5 (SCAN) ( page 19, 21)
6 (REPEAT) ( page 19, 21)
(CA-RC80N)
Mute/attenuation
Volume
Tune
Track selection
Fast forward/fast reverse
Preparation
The demonstration message appears for initial use.
1
Set your car's ignition switch to the
ACC or ON position.
2
Press [PWR] (Power).
The demonstration screen appears.
page 18, 20)
3
Hold down [VOL] (PUSH SEL: Select)
for 2 sec. or more to open the menu.
4
Press [VOL] (PUSH SEL: Select) to
select the Demonstration setting.
("DEMO" is displayed.)
( page 11)
• Be sure to select OFF when your car has
no ACC position in the ignition switch.
Failure to do this could cause the battery
to go dead.
The 24-hour system is used for the clock.
1
Press [PWR] (Power).
2
Select the radio AM (LW/MW) mode.
(page 12)
3
Hold down [DISP] for 2 sec. or more.
4
Adjust the hour and press [DISP].
[]: Forward
[]: Backward
5
Adjust the minute and press [DISP] to
confi rm the adjustment.
[]: Forward
[]: Backward
5
Turn [VOL] counterclockwise.
Notes:
• To return to the regular mode, press [DISP].
• Refer to the section on "Function Setting"
26).
• When "NO DISC" is displayed, the Demonstration
cannot be cancelled.
For an ACC-equipped car, select ON.
Caution
following functions are available. (Default: off)
• The power is turned on automatically when inserting a
disc.
• The clock can be displayed even if the power is off.
page 10)
OFF
ACC
IGN
Notes:
• Adjust the clock when "NO CT" appears on the display.
• Hold down [] or [] to change numbers
rapidly.
• When a broadcast of FM Radio Data System is
received, the clock is adjusted automatically by the
Clock Time service.
( page
( page 27) The
(
: ACC not equipped
(Default)
: ACC equipped
( page 14)
9
CQ-C3305N