Important Notices - ADTRAN IP 706 Release Notes

Important Notices

Web Configuration Support for ADTRAN IP 706 and IP 712 Phones
AOS A1.01.00 added the ability to configure the IP 706/712 phones from the IP
Phone Configs page in the web interface. For more information on the IP 700
Series phones, please visit the Product page (http://www.adtran.com/phones)
and Support page (http://www.adtran.com/support). The latest firmware version
(1.3.3) for the IP 700 Series phones is available on the Support page. Note that
these pages require an IPT Partner login.
Before using the IP Phone Configs GUI or User Accounts GUI to create phone
configs for the ADTRAN IP 700 Series phones, the default dial plans need to be
checked to make sure that they in a format compatible for the IP 700 Series
phones. Go to IP Phone Configs->Default Settings and verify that all entries
ending in a "T" have a period before the "T". If any of these entries are missing
the period before the "T", modify that dial string to include the period before the
"T".
After verifying and, if necessary, modifying the dial strings, a dial string needs to
be added for the intercom functionality. Under Extension Dial Strings, add
"**xxxx" or "**xxx", depending on whether you are using four or three digit dialing,
respectively.
Recommended AOS Image location(s)
AOS images can be stored on FLASH/NONVOL as well as on CFLASH.
However, it is recommended that the Primary AOS image be stored on
FLASH/NONVOL and the backup image be stored on CFLASH. One reason for
this is that with the release of AOS A2.01.00, there will no longer be enough
space on FLASH/NONVOL to store 2 versions of A2.xx.xx. To copy the current
image from FLASH/NONVOL to CFLASH, use the command "copy flash
<filename> cflash <filename>".
Default Configuration Changes
The following configuration items have had their default value changed
Polycom Phone "adtran-sip.cfg" Changes
"stickyAutoLineSeize": changed to enabled (for more information on this
setting, see the
Important Notices
NetVanta 7000 Series Products Release A1.04.00
Polycom SIP 2.x Admin Guide .
3