Procedures not specifically explained in this manual must be performed
only by a qualified technician.
turn the power Switch of the tool to its "OFF" position and unplug
the tool from its electrical outlet before performing any inspection,
maintenance, cleaning, or storage procedures.
1.
bEFORE EACh uSE,
cracked or missing insulators, damaged electrical wiring, and any other condition
that may affect its safe operation. If abnormal noise or vibration occurs, have the
problem corrected before further use. Do not use damaged equipment.
2.
AFtER uSE,
compressed air to blow all dust and debris from the ventilation openings.
3.
AFtER uSE,
children and other unauthorized people.
note: When not in use, always keep the grounding cable and its Clamp (34)
disconnected from any metal object.
SKU 97719
For technical questions, please call 1-800-444-3353.
mAintEnAnCE AnD SERViCing
tO pREVEnt SERiOuS injuRY FROm ACCiDEntAL
OpERAtiOn:
inspect the general condition of the Arc Welder. Check for
clean external surfaces of the Arc Welder with a clean cloth. Use
store the Arc Welder in a clean, dry, safe location out of reach of
Page 13