Replacing The Refrigerator Light Bulb; Shipment And Repositioning - Smeg CR312AP Instruction Booklet

3. If there is still water on the freezer floor, you can clear it away by using a sponge.
• Clean the interior by hand with lukewarm water and a little detergent. Never use
abrasive products or aggressive cleaning agents.
• Dry the inside of the unit, plug on the mains, and set the thermostat knob to position "5".
After 24 hours, reset the thermostat to the desired position.

Replacing the Refrigerator Light Bulb

1. Unplug the unit from the power supply,
2. Remove the refrigerator light cover (A) by pressing the
hooks placed on both sides of the cover.
3. Change the light bulb (B) with a new one (not more than
15 W).
4. Place the light cover in its place and plug the unit.
PART - 5.

SHIPMENT AND REPOSITIONING

• Original package and foam may be kept for re-transportation (optionally).
• You should fasten your fridge with thick package, bands or strong cords and follow the
instructions for transportation on the package for re-transportation.
• Remove movable parts (shelves, accessories,
vegetable bins etc.) or fix them into the fridge
against shocks using bands during re-positioning
and transportation.
• Carry your fridge in the upright positio.
EN - 23 -
B
A
B
A