Table of Contents
Advertisement
Welding Current
Duty Cycle
Power Consumption
Heat Control
Ground Cable
Torch Power Cable
Power Cord
Welder Tip
Wire Size
Wire Spool Size
Overall Dimensions
Weight
Accessories
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions
listed below may result in electric shock, fire, and/or serious injury.
Keep your work area clean and well lit. Cluttered benches and dark areas invite
1.
accidents.
Do not operate power tools in explosive atmospheres, such as in the presence
2.
of flammable liquids, gases, or dust. Power tools create sparks which may ignite
the dust or fumes.
3.
Keep bystanders, children, and visitors away while operating a power tool.
For technical questions, please call 1-800-444-3353;
SKU 55167
SPECIFICATIONS
63 ~ 68 amps; High setting: 79 ~ 90 amps
10% at 80 amps; 18% at 60 amps
(See explanation of Duty Cycle on page 15.)
120 VAC, 24 amps peak, single phase
Should be connected to a 20 amp minimum dedicated circuit
2 settings
6 AWG, 6 foot
8 AWG, 6 foot
3-wire, 14 AWG, UL listed
Included tips will accept 0.030" flux core wire
(0.9 mm tips, to account for thermal expansion of the wire)
0.030" flux core wire
4" diameter/ 2 lb. spool
14-1/2 (L) x 8-1/2 (W) x 15-1/2 (H) inches
34.45 lb.
Spare Welder Tip 0.9mm (for .030" wire)
Welding Face Shield
Wire Brush / Hammer combination
SAVE THIS MANUAL
GENERAL SAFETY RULES
WARNING!
SAVE THESE INSTRUCTIONS
Work Area
Troubleshooting section at end of manual.
Page 3
Advertisement
Table of Contents
