CHICAGO Welding 45689 Set Up And Operating Instructions Manual page 7

2. Next, Attach the complete Handle Assembly (parts #17, #18, #19, #20) to the Front
Housing (part #28) of the Spot Welder, using the four Hex Head Screws (part #16).
(See Figure d, and assy. diagram.)
To Attach Tong Tips To The Spot Welder:
1. caution: Prior to attaching the Tong Tips (parts #48), make sure the Spot Welder is
disconnected from its electrical power source.
2. To attach the Tong Tips (part #48) to the Upper and Lower Tongs (parts #46, #47),
screw the Tips onto the Tongs as shown in Figure e.
SKU 45689
WASHER
HANDLE (#17)
HEX
NUT HANDLE BRACKET
(#20)
POWER SWITCH (#25)
(#25)
HEX SCREW (#16)
For technical questions, please call 1-800-444-3353.
BOLT (#19)
(#18)
UPPER TONG (#46)
LOWER TONG (#47)
Figure c
Figure d
TONG TIP (#48)
Figure e
Page 7