Sanyo Xacti VPC-S7EX Instruction Manual page 59

FLASH SETTING
2
Press the [n] or [o] button to select the desired flash mode, and
press the SET button.
3
Press the shutter button.
h The picture is snapped and the flash operates according to the
selected mode.
HINT
When auto is selected...
i The k icon indicating the flash setting is not shown on the Shooting
Screen.
When auto or red-eye reduction is selected...
i When the subject is in focus, if the camera determines that the flash is
necessary, a k or J icon appearing on the monitor indicates that the
flash will operate.
53
English