The Hob; Residual Heat Indicator; Setting Procedure; Dual Circuit Hotplate - Siemens HL 62054 Instruction Manual

The hob

17 cm hotplate
or 17 x 26 cm
extended
cooking zone
18 cm
hotplate
Residual
heat indicator

Setting procedure

20

Residual heat indicator

The hob has a residual heat indicator for each
hotplate. It indicates which hotplates are still hot.
This also enables to you save energy by making use
of the residual heat, e.g. to keep a small meal warm
or to melt chocolate.
Adjust the heat setting of the individual hotplates
using the hotplate controls.
0 = hotplate off
1 = Lowest heat setting
9 = Highest heat setting
The setting range is limited by a stop.
Do not turn the knob past this point.
The indicator light comes on when a hotplate is
switched on.
14.5 cm
hotplate
21 cm and 12 cm
dual circuit
hotplate