Table of Contents
Advertisement
Setting procedure
l Dual circuit
hotplate
m Hotplate with
extended cooking
zone
18
Adjust the heat setting of the individual hotplates
using the hotplate controls.
0 = hotplate off
1 = Lowest heat setting
9 = Highest heat setting
The setting range is limited by a stop.
Do not turn the knob past this point.
The indicator light comes on when a hotplate is
switched on.
The size of these hotplates can be altered.
Activating the large hotplate:
Turn the hotplate control to setting 9 - you will feel
light resistance - and then clockwise to
l = large dual circuit hotplate or
m = extended cooking zone.
Then select the required heat setting immediately.
Switching back to the small area:
Turn the hotplate control back to 0 and reset it
N.B. Never switch the hotplate control beyond the
symbol to 0.
The dual circuit hotplate is particularly suitable for
heating up small quantities of food.
.
Advertisement
Table of Contents
