And; Changing The Programme - Siemens washing machine Instruction Manual And Installation Instructions

Changing the programme

Changing the programme:
All modifications are possible before the
"Start/Pause" button
- immediately after the start of the
programme:
Change programme (e.g. from "COTTONS" to
"DELICATES" etc.). Then press "Start/Pause"
button 5 again.
- during the washing programme:
Change programme (e.g. from "DELICATES"
to "COTTONS" etc.). Then press
"Start/Pause" button
water may be drained. The entire programme
begins anew.
The temperature can be changed during the
programme without pressing the "Start/Pause"
button again.
The spin speed may be changed at any time.
All additional functions may be activated or
deactivated during the entire programme as
long as they have not finished.
Before switching on the machine, check that the mains lead is connected and the tap is
open.
Ensure that all lids are properly closed.
For purposes of safety, it is suggested that the mains cable be unplugged and the tap
closed when the programme has ended.
After a power outage, the programme resumes from the point at which it was broken
off.
5 has been pressed.
5
again. Some of the
(continued)
- during the preselection of starting time:
During the preselection of the starting time,
all programme changes are allowed.
The preselection of starting time may be
changed at any time, e.g. up to 18 hours by
using pushbutton
If the programme should start immediately,
set the starting time back (a step after 19 h)
and press the "Start/Pause" button.
All available additional functions may be
activated during the preselection of starting
time.
-
at the end of the programme:
If appears in the display
programme may be selected without first
having to set the programme selector
"O".
19
3
.
A
, a new
1
on