Adding Wash + Changing Programme; Delayed Start; Topping Up Laundry/Changing Programs - Siemens washing machine Instruction Manual And Installation Instructions

Delayed Start

By pressing the pushbutton
the start of the programme can be delayed
from 1 to 19 hours.
The selection is confirmed after a few
seconds. To activate the delayed starting,
press the "Start/Pause" button.
The course of the Delayed Start is displayed
A
every hour from 19 hours to 1 hour, and
then every minute from 59 minutes to
1 minute. During the entire process, the
Delayed Start symbol is illuminated.
The four segments flash in succession.
After the Delayed Start time ends, the
programme starts and the remaining time
A
is indicated on the display panel.
Topping up laundry + changing programs
Adding or removing laundry
(not possible during spin cycle):
During the washing cycle, laundry may be added or removed.
• Press the "Start/Pause" button
• Remove or add laundry if necessary.
(*) It may be 1 to 2 minutes until the lid unlocks.
• Press the "Start/Pause" button
If a Delayed Start has been selected, the drum may be opened
at any time before the start of the programme without aborting
the programme and having to start anew.
Changing the programme
If you have chosen the wrong programme:
• Turn programme selector to "O".
• Set programme selector to the desired
programme.
• Press " Start" if applicable.
The spin speed may be changed at
any time during the programme.
As long as they have not finished, all
options may be activated or
deactivated at any time during the
course of the programme.
3
multiple times,
5
to abort the programme.
5 to restart the programme.
18
During the course of the Delayed Start, the
settings may be changed at any time, see
section "Changing the programme".
remaining time is stopped.
function is again activated
Terminating the programme
If you would like to terminate a programme
before it is completed:
• Turn programme selector to " O".
• Set programme selector to "Spin"
(Schleudern) .
Select desired spin speed for "Spin" (but not
Rinse Stop).
• Press " Start" button.
The drum does not stop at the lid
opening position. Note: drum may be hot
when using the 90°/60° settings!
In A the indicated
In A the remaining time
(two dots flash).