When The Programme Has Ended - Siemens XLM 700 Instruction Manual And Installation Instructions

When the Programme has Ended

Unloading the
laundry
24
The End indicator light is on.
1. Turn the programme selector to Off
and if required
2. Select an additional programme (Pumping,
Spin B or Rinsing).
3. Press the Start button.
4. At the end of the additional programme turn the
programme selector to Off.
1. Turn off the water tap.
2. Open the loading door.
If the loading door cannot be opened:
q Wait aprox. for 2 minutes.
(the safety function is active)
or
q there is still water in the washing machine if the
No B option was selected. Select Pumping or
Spin B.
3. Unload the laundry.
Caution
Remove any foreign objects (e.g. coins, paper clips)
from the drum and rubber seal - risk of rust!
i Leave the loading door open to allow the inside of
the washing machine to dry out.