Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or Cordless drill/driver 2321 moving parts. Damaged or entangled cords increase the risk of electric shock. INTRODUCTION e) When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Page 8
• Do not disassemble charger or battery power source • Do not attempt to recharge non-rechargeable batteries • SKIL can assure fl awless functioning of the tool only with the charger when original accessories are used • If you anticipate long periods of non-use for the tool, it •...
• Explanation of symbols on charger/battery - ensure that the outside surface of the battery is clean 3 Read the instruction manual before use and dry before inserting into charger 4 Only use the charger indoors - do not remove battery from tool while it is running 5 Double insulation (no earth wire required) - a signifi...
SKIL patterns power tools - send the tool or charger undismantled together with proof of purchase to your dealer or the nearest SKIL service station (addresses as well as the service Perceuse/visseuse sans fil 2321 diagram of the tool are listed on www.skileurope.com)