Data Services - Siemens M56 User Manual

80
§Menu§
Km K
Select function.
K

Data Services

For the
MMS, WAP
applications at least one connection
profile must be set up and activated.
Select profile.
G
Open menu.
§Options§
Change Sett.
Press, then:
For CSD (Circuit Switched Data)
CSD Settings
Select.
If it has not been pre-installed, enter
the data or enter the required set-
tings (your service provider will sup-
ply you with information on this):
Press.
§Edit§
Dial-up
Enter ISP number.
number
Call type:
Select ISDN or analoge.
Login name:
Enter login name.
Password:
Enter password (shown
as a series of asterisks).
DNS1 / DNS2:
(Optional).
Save settings.
§Save§
m Setup
Connectivity
and
Mail,Java,Rms
For GPRS (General Packet Radio
Service)
GPRS Settings
Select.
You can activate GPRS for the profile
and change the settings here. You
can only start to use GPRS once you
have activated GPRS on your phone
(p. 79).
§Edit§ Press.
APN:
Enter service provider
address.
Login name:
Enter login name.
Password:
Enter password (shown
as a series of asterisks).
DNS1 / DNS2:
(Optional).
Save settings.
§Save§
§Menu§
Km K
Select function.
K
HTTP Profile
Preparation of the phone depends
on current service provider:
• The settings have already been
installed by the provider. You can
start immediately.
• Access profiles have already been
set by your provider. Then select
and activate profile.
Connectivity