Notes A-Z - Siemens M56 User Manual

112
Activate/deactivate tones
Hold down.
*
In standby mode
All audible signals (including the ring
tone) can be switched off and on
again. The function ends when the
phone is switched off.
During a call:
Switch off the ring tone for the cur-
rent call/alarm (not when
Answer, p. 75, is active). Accepting or
rejecting the call ends the function.
• The display will continue to show
a call.
• The vibrating alert function will
remain active if it was previously
switched on.
• The audio settings are not
changed.

Notes A-Z

Completing phone numbers in
the Phonebook/Addressbook
Digits may be replaced by a "?" when
phone numbers are entered in the
Phonebook/Addressbook:
#
These wildcards must be replaced
with numbers before dialing (e.g.,
with the extension numbers in a
phone system).
Any to
To make a call, select the phone
number from the Phonebook/
Addressbook.
A
J
A
Hold down.
Press.
Replace "?" with numbers.
Press, number is dialed.