Roof; Fastening - Mercedes-Benz Vito Operating Instructions Manual

Bulb
7
Third brake lamp
8
Additional turn signal
lamps on the roof
9
Brake lamp, tail lamp
a
Turn signal lamps
b
Reversing lamp
c
Rear foglamp (driver's
side), parking lamps
d
Licence plate illumina-
tion
!
Remove the rear light cluster with care, so
as not to damage the paintwork.
Due to the installation position, Mercedes-Benz
recommends that you have the bulbs changed
at a qualified specialist workshop, e.g. a
Mercedes-Benz Service Centre.
Always have maintenance work carried out at a
qualified specialist workshop which has the
necessary specialist knowledge and tools to
carry out the work required. Mercedes-Benz
recommends that you use a Mercedes-Benz
Service Centre for this purpose. In particular,
work relevant to safety or on safety-related sys-
tems must be carried out at a qualified special-
Model
ist workshop.
LED
Rear light cluster
P 21 W
E
Remove the rear light cluster to change
the bulbs.
P 21/5 W
PY 21 W
P 21 W
P 21 W
C 5 W
1 Securing bolts
2 Rear light cluster
E
Switch the lights off.
E
Open the tailgate/rear door.
i
There is a screwdriver in the vehicle tool kit
in the stowage compartment under the driver's
Nur fuer internen Gebrauch
Practical advice
Electrical system
seat or in the stowage compartment at the rear
( e page 249).
E Unscrew the three securing bolts 1 at
the side.
E
Turn rear light cluster 2 outwards.
E Pull rear light cluster 2 out of the fas-
tener holes.
E
Disconnect the electrical connector.
1 Bulb holder
2 Fastening lugs
E
Press fastening lugs 2 in the direction
of the arrow.
E Remove bulb holder 1.
5
ee
327