Mercedes-Benz Vito Operating Instructions Manual page 105

Menus
The adjusting knobs ,, ., 5 or 0 can
be used to select the following functions:
I Call up the service due date
I Check the engine oil level (
I Select/set the auxiliary heating
e
switch-on time ( page 168)
e
I Set the time ( page 103)
I Select the units for the outside temper-
e
ature ( page 103)
I Select the units for the distance
e
( page 103)
E
To return to the standard display:
press the menu button 5 for longer
than 1 second.
or
E
Do not press any button for 10 sec-
onds.
The display accepts the changed set-
tings.
Setting the time
E
Turn the key to position 2 in the igni-
tion lock.
Press menu button 5 repeatedly until
E
the hours figure flashes.
Press , or . to set the hours.
E
Press reset button 4.
E
The minute display flashes.
e
page 254)
Press , or . to set the minutes.
E
i
If you keep the , or . button pressed,
the reading will change continuously.
Selecting the units for the outside tem-
perature
E
Turn the key to position 2 in the igni-
tion lock.
Press menu button 5 repeatedly until
E
the outside temperature and the tem-
perature units of measurement flash.
Press , or . to select the tempera-
E
ture display in degrees Celsius (°C) or
Fahrenheit (°F).
Selecting the units for the distance
The selected distance units are used for:
Total distance recorder
I
Trip meter
I
Nur fuer internen Gebrauch
On-board computer without steering wheel buttons - version A
Digital speedometer
I
I Speedtronic
E
Turn the key to position 2 in the igni-
tion lock.
Press menu button 5 repeatedly until
E
the value and the distance units of
measurement flash.
Press , or . to select whether the
E
distance is shown in kilometres (km) or
miles.
Controls
3
103