Changing The Bulb - Thermador T36BT Series Use & Care Manual

Changing the bulb

m
WARNING
To avoid electrical shock which
can cause death or severe
personal injury, disconnect
power to appliance before
making repairs.
After making repairs, reconnect
power.
Switch off the appliance with
the POWER button! Pull out
the mains plug or switch off
the fuse.
CAUTION
Never touch a halogen bulb with
bare fingers.
When inserting a glass halogen
bulb, always hold with a soft cloth.
We recommend that a service
technican changes the bulb.
Halogen bulbs above
Halogen bulb type:
20 W/12 V/socket G4
Release the cover and remove
from the clip.
Pull out the defective halogen
bulb.
26
m
Insert a new halogen bulb.
Touch the halogen bulb with
a soft cloth only.
Attach the cover and connect
to the clip.
Halogen bulb at the
side
Halogen bulb type:
10 W/12 V/socket G4
Pull out the cover rail forwards.
To loosen the cover rail use
a screwdriver.
Remove the disc forwards.
Pull out the defective halogen
bulb.
Insert a new halogen bulb.
Touch the halogen bulb with
a soft cloth only.
Insert the disc.
Insert the cover rail.